01
Continuously Caulk Around Corners Without Skipping A Beat
Our patented angled design allows you to easily maneuver around 90° corners without stopping or regripping the gun. Fast, easy, simple.
The 360° Pro Caulking Tip® is the only caulking nozzle that makes doing professional-grade work easy enough for a beginner. Our patented angled design rotates a full 360° on any standard or large caulk tube so you get smooth, even beads in the tightest spaces without wiping.
If you have a caulking gun in your hand, you need a 360° Pro Caulking Tip. Engineered from durable, pliable plastic that slips right onto your existing tube nozzle.
Our patented angled design allows you to easily maneuver around 90° corners without stopping or regripping the gun. Fast, easy, simple.
The patented angled design allows for a full 360° rotation. Even caulking inside the tightest spaces, overhead frames, and behind fixtures is easy!
The precision tip allows you to get nice, even lines and corners the first time — without wiping! Now you can caulk faster and waste less material.
With the 360° Pro Caulking Tip clean up is a breeze! Simply remove the tip, run some warm water through it, and you’re done and ready for use again.
Fits any size caulking or adhesive tube. Simply cut to the desired thickness, slip it on the existing tube and you’re ready to go!
Makes caulking so easy that even beginners can do a professional level job. Get them for your whole crew and your customers will be raving.
With the 360° Pro Caulking Tip, even caulking inside the tightest spaces and around 90° corners is effortless. Watch both live demonstrations below.
Watch the 360° Pro Caulking Tip glide around granite countertops, undermount sinks, baseboards, window sills, and exterior penetrations.
Independent demonstration by The Weekend Handyman showing setup on a standard caulking tube and application in awkward corners.
Granite Countertop & Backsplash Seams
Undermount Sinks, Baseboards & Shower Tile
Pest Control & Exterior Stucco Entry Points
Interior Door Casings & Trim Corners
Window Sills & Frame Perimeter Sealing
Automotive, Marine & Overhead Door Frames
Slip the 360° Pro Caulking Tip onto silicone, acrylic latex, polyurethane sealant, or construction adhesive cartridges.
Eliminate wrist strain and finger-wiping on finish carpentry, bath/kitchen remodels, and stone countertop installations.
Proven over 3+ years by commercial pest and wildlife control technicians sealing hard-to-reach rodent and insect entry points.
Reach inside hulls, bilges, RV roofs, and engine bays where a straight 10-inch caulking gun simply cannot fit straight-on.
Choose a Single tip, our best-value 3-Pack, or the 10-Pack for your whole crew. Interested in larger bulk pricing? Contact us below.
Durable, pliable, reusable angled caulking tip that fits on large or small caulking guns and rotates a full 360° to eliminate awkward angles.
Keep multiple bead sizes ready to go at once — fine bead for countertops and sinks, medium bead for trim, and wide bead for exterior gaps.
Equip your entire pest control, painting, countertop, or remodeling crew so every technician delivers clean, professional-grade beads on every job.
Read why service companies outfit every technician’s truck with the 360° Pro Caulking Tip.
“Whitmore Pest Control has been using the 360° Pro Caulking Tip for over 3 years. We supply our entry point repair technicians with this effective resource to help them achieve professional grade workmanship.”
“We install these swivel tips consistently on each type of caulk and adhesive tube our company uses. Since we started using the 360 Pro Caulking Tip it is hard for us to imagine what it would be like to not have this innovative caulking capability that the 360° Pro brings to our work every day.”
“The 360° Pro Caulking Tip has made hard to access caulk application much easier. This low cost, easy to clean, durable swivel tip is stable and it shortens the time it takes to caulk.”— Marvin Christner, Whitmore Pest and Wildlife Control INC
The 360° Pro Caulking Tip was proudly designed in Denver, Colorado by Chris Cross, an industry veteran of 20+ years.
It was created with his peers in mind to eliminate the frustrations that come from using typical caulking tips, such as wasted material, messy fingers, and awkward angles.
The patented 360° Pro Caulking Tip is proudly made from durable, pliable materials right here in the USA.
Side-by-side comparison of the patented 360° Pro Caulking Tip against standard straight tips and rigid adapters.
| Comparison Factor | 360° Pro Caulking Tip® | Standard Straight Tube Nozzle | Rigid Screw-On Bent Nozzle | Finger-Wiping & Masking Tape |
|---|---|---|---|---|
| 90° Inside Corners | Rotates 360° continuously through corners without stopping | Jams in corners; requires stopping and repositioning gun | Unscrews or binds when rotated mid-bead | Leaves smeared buildup in corner joints |
| Tight & Overhead Spaces | Angled swivel tip reaches behind pipes, sinks & engine bays | 10"+ gun barrel blocks access to tight clearances | Fixed angle requires twisting entire caulking gun | Nearly impossible behind obstacles |
| Bead Finish & Mess | Smooth, precision bead on the first pass — no messy fingers | Uneven ridges that require finger-tooling and rags | Inconsistent bead angle when turning | Messy hands, wasted caulk, slow tape removal |
| Tube Compatibility | Universal slip-on fit for any tube size (10 oz or 29 oz) | Built into single-use cartridge only | Only fits specific threaded cartridge necks | N/A |
| Reusability & Cleanup | Pliable plastic cleans out in seconds with warm water | Hardens inside nozzle; tube often wasted | Rigid plastic is difficult to clear once cured | Single-use rags, gloves & tape waste |
Order 1-Packs, 3-Packs, or 10-Packs directly, or reach out for bulk fleet pricing, hardware/paint store display packs, and patent licensing.
Supply every truck and entry-point technician with 10-Packs or custom bulk cases so new hires and veterans lay down clean beads fast.
High-impulse, U.S.-made counter display item right next to caulking guns, silicone cartridges, and stone installation supplies.
Solve the #1 complaint when applying marine sealant, RV roof lap sealant, or RTV gasket maker in cramped compartments.
Interested in national distribution, bundling with sealant cartridges, or licensing the patented 360° Pro Caulking Tip? Contact inventor Chris Cross directly.
Select your pack or inquiry type below — goes straight to Chris Cross.
Everything you need to know about using, cleaning, and ordering the 360° Pro Caulking Tip.
The patented 360° Pro Caulking Tip has an angled nozzle that slips snugly onto your existing caulking tube tip and rotates a full 360 degrees. As you approach a 90° corner or work behind a sink, toilet, pipe, or engine bay, the tip swivels smoothly in the direction of travel so you never have to twist your wrist or stop your bead.
Yes! It is made of durable, pliable plastic designed to fit any size caulking or adhesive tube, large or small. Simply cut the nozzle on your existing caulk tube, trim the 360° Pro Caulking Tip to your desired bead width, slip it firmly onto the existing tube nozzle, and you’re ready to caulk.
Yes. Clean up is a breeze: simply pull the tip off the caulking tube when finished, run warm water through it (or flex the pliable plastic once silicone cures), and it is ready to use again and again.
We stand behind every order with a 100% Customer Satisfaction Guarantee. If you are not totally satisfied with your purchase, please contact us within 30 days of purchase at 360procaulkingtip@gmail.com or 720-217-3411 and we will issue instructions for return.
You can order our Single ($7.95), 3-Pack ($12.95), or 10-Pack ($49.95) above. For bulk crew pricing, retail distributor displays, or patent licensing inquiries, email 360procaulkingtip@gmail.com, call Chris Cross at 720-217-3411, or submit the form above.